**You must have Adobe Acrobat Reader to view and print the above spec sheet.

Vertical 22

The Woodford Vertical 22 is designed to provide year round hot and cold water service regardless of outside temperature. The vertical mount makes it ideal for slab construction. Separate hot and cold inlet tubes and operating handles allow for manually operated water temperature control. See our  Close Coupled Units

Suggested Uses

Residential structures where hot and cold water service is required.

SPECIFICATIONS

Permanent stainless steel seat will not wire draw.

EPDM PACKING - To prevent leaking

Loose Tee Key available as option

Faucet - drains automatically when hose is detached

Vacuum Breaker - ASSE 1019 Type C  approved * CSA Certified * UPC Listed

Nozzle - 3/4" male hose thread

Valve Operating Threads - Full circle threads on valve body and retainer

NOTICE: Models 14,17, 22, V22 come standard with the MH (Metal Handle)

No Lead Solder - All solder joints

Seat Washer - Standard "O" Size

Max Pressure - 125 p.s.i.

Max Water Temperature - 120 degrees F

Optional: The RK-PT kit is available at additional cost to convert the hot side handle to a Push to Turn. This will protect against accidental use.

Warning - Faucet must be installed with downward pitch toward nozzle and hose must be removed in freezing weather or faucet may freeze and burst. This product is tested and listed to an ASSE standard. The standard states that this product is not intended to be used for over 12 hours of continuous use.