|
Model
HC67 and HCB67 Series
The Models HC67 and HCB67 are
freezeless hot and cold mixer wall hydrants with automatic draining
and hose connection Backflow Protection . Hydrant drains when shut
off, even if hose is attached. The Model B67 is enclosed in a flush
mounted wall box. Both models are designed for commercial use where
outside water service is required.
 |
|
Specifications
|
| HOSE CONNECTION BACKFLOW PREVENTER -
NIDEL Model 37HA with ¾ inch male hose thread, ASSE
Standard 1052 approved, UPC/ IAPMOâ listed, Field Testable, Two
check valves |
| MODEL HC67 – Conforms to ASME / ANSI A112.21.3M and the
hose coupling threads conform to ASME / ANSI B1.20.7 and ASME / ANSI B1.21M |
| EXTERIOR FINISH –
Standard:
Chrome;
Optional – brass; Other Options: Polished brass (HCB67 Only) |
| VALVE SEAT - Permanent type
brass valve body with hemispherical seating surface. |
| VALVE - One piece valve
plunger accurately controls both flow and drainage with a minimum number of turns and
without need for adjustments |
| DRAIN – Under nozzle away from
hands of operator and HC67 offers a lip to divert water away from building |
| CASING - Copper tube casing. |
| NO LEAD SOLDER - All solder joints. |
| STEM - Hardened Stainless Steel stem resists
damage |
| TEE KEY -Loose key operates hydrants |
| INLETS - 3/4" Female
Pipe Thread |
| CHECK VALVES: Located in
the hot and cold inlet to prevent migration. |
| WALL CLAMP – Standard except close
coupled. |
| MAX PRESSURE – 125 psi |
| MAX TEMP - 120° F |
| ACCESS
- DO NOT INSTALL WITHOUT SERVICE ACCESS TO MIXER BODY AND INLETS |
|
This
product is tested and listed to an ASSE standard. The standard states that this
product is not intended to be used for continuous use |
