Product Index
Woodford — Excellence. Always.
Faucet Finder Woodford Wall Faucets
Visual identification guide

What faucet is on your house?

Answer a few quick questions about what you can see — handle shape, what's on the spout, markings on the casting — and we'll narrow it down to your exact Woodford model, with its specs and ordering details.

Start identifying Browse all models

Identify your faucet

Field guide · No tools required

All models

Tap a model for full specs

Repair Kits

From the official catalog sheets

Every current model has a factory repair kit. Wall-thickness-specific parts (valve stems and operating rods) are ordered by your wall thickness in inches — measure it or count it off the faucet's overall length.

RK-ADJ-PRV Adjustable Operating Rod — one kit, any wall thickness 4″–14″

Instead of ordering a wall-thickness-specific rod, the RK-ADJ-PRV uses color-coded stems you assemble to match your measured rod length — and it includes the patented resetting anti-burst PRV valve. Use it to upgrade a Model 14 or 17 with burst protection, or to replace the rod in a Model 16, 19, 22, or V22. Kit includes the stems, stem stop, clips, EPDM packing, packing nut, metal wheel handle, and handle screw.

▶ Watch: RK-ADJ-PRV installation & anti-burst conversion
Kit diagramModelRepair kit & contentsWall-thickness parts & related kits
Model 14
RK-14MH
All parts needed to repair the faucet — rod not included:
  1. 30002 Handle Screw
  2. 30096 Wheel Handle (Metal)
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. 30006 Packing Support Washer
  6. 30008 Valve Seat Rubber
  7. 30009 Retainer Screw
 Valve stem assembly 35720–35727 / 35736–35738 by wall thickness 4″–24″ (35942 for CC 1 3/4″) · Burst Upgrade Protection: RK-ADJ-PRV
Model 14 older
RK-14MH
Same kit and parts as the current Model 14 — only the handle differs (older gray metal vs. tan). All parts needed to repair the faucet — rod not included:
  1. 30002 Handle Screw
  2. 30096 Wheel Handle (Metal)
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. 30006 Packing Support Washer
  6. 30008 Valve Seat Rubber
  7. 30009 Retainer Screw
 Newer tan handle via RK-14/17MH · Burst Upgrade Protection: RK-ADJ-PRV
Model 16
RK-19
The Model 16 already has the PRV built in, so it’s repaired with the RK-19 — reuse your existing washer and discard the included float/vacuum-breaker kit. Rod not included.
  1. 30002 Handle Screw
  2. 30559 Oval, Die Cast Aluminum Wheel Handle
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. 30421 Packing Washer
  6. 30459 Check Valve
  7. 30008 Valve Seat Rubber
  8. 30804 Retainer Screw
  9. RK-19VB Float Kit
 Also fits: the RK-PRV valve stem (see the dedicated RK-PRV row below and the rod finder). · Burst Upgrade Protection: RK-ADJ-PRV
RK-PRV kit
RK-PRV-4 … RK-PRV-24
Upgrades a Model 14, 17 or older 22/V22 to a pressure relief valve system — and repairs the Model 16, 19 and newer 22/V22. Available in 4″–24″ lengths. Measure the overall length of the brass rod (with rod and check valve attached) and order the matching size, e.g. RK-PRV-10 for a 10″ wall.
  1. 30002 Handle Screw
  2. 30096 Round Metal Handle
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. Valve Stem Assembly (sized to wall thickness — see the rod finder below)

Quantity 2 required for the Model 22 / V22 (one per handle). The washer is not included — save and reuse yours. Packing may be installed in any direction.

Rod only 35092–35102 (items 6–9) by wall thickness 4″–24″ · Adjustable alternative: RK-ADJ-PRV (4″–14″) · Kit alternative: RK-19 fits — reuse your existing washer and discard the included vacuum breaker (the Model 16 doesn't use one)
Model 17
RK-17MH
All parts needed to repair the faucet — rod not included:
  1. 30002 Handle Screw
  2. 30096 Handle (Metal)
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. 30421 Packing Washer
  6. 30418 Check Valve
  7. 30008 Valve Seat Rubber
  8. 30009 Retainer Screw
  9. RK-17VB Float Kit
  10. 30459 Bevel Check Valve

Item 10 (bevel check valve) is for faucets dated 04/98 or later — check the packing nut.

 Vacuum breaker float kit RK-17VB · Valve stem assembly 35720–35727 / 35736–35738 by wall thickness · Burst Upgrade Protection: RK-ADJ-PRV
Model 19
RK-19
All parts needed to repair the faucet — rod not included:
  1. 30002 Handle Screw
  2. 30559 Oval, Die Cast Aluminum Wheel Handle
  3. 30059 Packing Nut
  4. 30560 EPDM Packing
  5. 30421 Packing Support Washer
  6. 30459 Check Valve
  7. 30008 Valve Seat Rubber
  8. 30804 Retainer Screw
  9. RK-19VB Float Kit
 Vacuum breaker float kit RK-19VB · PRV stem RK-PRV-4–24, rod only 35092–35102 · Adjustable alternative: RK-ADJ-PRV (4″–14″)
Model 22 & V22
RK-22PRV
Model 22/V22 hot & cold, 2008+ vent float design. Includes — rod not included:
  1. 30566 Hot Plug Button
  2. 30002 Handle Screw (2)
  3. 30559 Oval, Aluminum Handle (2)
  4. 30059 Packing Nut (2)
  5. 30560 EPDM Packing (2)
  6. 30421 Packing Washer (2)
  7. 30565 Cold Plug Button
  8. 30459 Check Valve (2)
  9. 30008 Valve Seat Rubber (2)
  10. 30804 Retainer Screw (2)
  11. RK-22VB Vent Float Kit
 Vacuum breaker float kit RK-22VB (Model 22) · PRV stems RK-PRV-4–24, rod only 35092–35102 — stems interchange between 22 and V22 heads · Adjustable alternative: RK-ADJ-PRV (4″–14″)
Model 22 & V22 pre-2008
RK-22MH
Model 22 metal handle repair kit — includes both hot and cold metal handles. For the older Model 22 & V22 with round metal handles (before the 2008 vent-float redesign). Not the current RK-22PRV kit.
  1. 30566 Hot Plug Button
  2. 30002 Handle Screw (2)
  3. 30096 Round, Die Cast Alum. Wheel Handle (2)
  4. 30059 Packing Nut (2)
  5. 30560 EPDM Packing (2)
  6. 30006 Packing Washer (2)
  7. 30565 Cold Plug Button
  8. 30459 Check Valve (2)
  9. 30008 Valve Seat Rubber (2)
  10. 30009 Retainer Screw (2)
 Burst Upgrade Protection: RK-ADJ-PRV
Model 25
RK-25
Fits both the Model 25 and Model 27 — all parts needed to repair the faucet (rod not included):
  1. 30234 Handle Screw
  2. 30239 Wheel Handle
  3. 30241 Head Nut
  4. 30236 Drain Guard
  5. 30245 Headnut Gasket
  6. 30238 Stem Screw
  7. 35280 Drain Valve Assembly
  8. 30230 Plunger Assembly
 Vacuum breaker 34HA-BR · Operating rod 30304–30324, rod assembly 35501–35524 by wall thickness
Model 27
RK-27
Fits both the Model 25 and Model 27 — everything in the RK-25 plus a 50HA double-check backflow preventer (rod not included):
  1. 30234 Handle Screw
  2. 30239 Wheel Handle
  3. 30241 Head Nut
  4. 30236 Drain Guard
  5. 30245 Head Nut Gasket
  6. 30238 Stem Screw
  7. 35280 Drain Valve Assembly
  8. 30230 Plunger Assembly
  9. 50HA-BR Backflow Preventer

No backspray. Upgrading a Model 25 from the 34HA to the 50HA stops the spray-back you get when shutting off the faucet with a hose still connected. The 50HA is the first ASSE 1052 approved auto-draining double-check backflow preventer — when the hose is removed, two linked but independent checks open a path so water drains completely and won’t freeze.

 Backflow preventer 50HA-BR · RK-25 fits if the backflow preventer doesn't need replacing · Operating rod 30304–30324, rod assembly 35504–35524
Model 30
RK-30
All parts needed to repair the faucet — rod not included:
  1. 30002 Handle Screw
  2. 30559 Oval, Die Cast Aluminum Wheel Handle
  3. 30059 Packing Nut
  4. 30264 Stem Screw
  5. 30105 Packing Washer
  6. 35281 Drain Valve Assembly
  7. 30260 Plunger Assembly
 Backflow preventer 50HA-BR · Operating rod 30301–30324, rod assembly 35550–35574 by wall thickness (incl. CC)
Model 10 legacy
No factory kit
Individual parts only
  1. 10112 Handle Screw
  2. 50023 Wheel Handle
  3. 74533 Packing Nut
  4. 50024 Packing
  5. 74527 Packing Support Washer
  6. 74528 Valve Seat Rubber
  7. 74530 Retainer Screw

Also shown in the parts diagram: 50064 · 74529 · 74532 · 10113
Model 12 legacy
No factory kit
Individual parts only
  1. 30002 Handle Screw
  2. 74513 Wheel Handle
  3. 30107 Packing Nut
  4. 30005 Packing
  5. 74506 Packing Support Washer
  6. 74509 Valve Seat Rubber
  7. 30009 Retaining Screw
Rod / valve stem finder Repair kits don’t include the rod. Choose your model and wall thickness to get the exact part.
Overall length chart
Wall thicknessOverall length (Dim. “A”)Dim. Chart
Part no.
4″5 7/8″35720
6″7 7/8″35721
8″9 7/8″35722
10″11 7/8″35723
12″13 7/8″35724
14″15 7/8″35725
16″17 7/8″35736
18″19 7/8″35726
20″21 7/8″35737
22″23 7/8″35738
24″25 7/8″35727
4″5 7/8″RK-PRV-4
rod only: 35092
6″7 7/8″RK-PRV-6
rod only: 35093
8″9 7/8″RK-PRV-8
rod only: 35094
10″11 7/8″RK-PRV-10
rod only: 35095
12″13 7/8″RK-PRV-12
rod only: 35096
14″15 7/8″RK-PRV-14
rod only: 35097
16″17 7/8″RK-PRV-16
rod only: 35098
18″19 7/8″RK-PRV-18
rod only: 35099
20″21 7/8″RK-PRV-20
rod only: 35100
22″23 7/8″RK-PRV-22
rod only: 35101
24″25 7/8″RK-PRV-24
rod only: 35102
4″4-7/16″30304
6″6-7/16″30306
8″8-7/16″30308
10″10-7/16″30310
12″12-7/16″30312
14″14-7/16″30314
16″16-7/16″30316
18″18-7/16″30318
20″20-7/16″30320
22″22-7/16″30322
24″24-7/16″30324
CC5″35501
4″8″35504
6″10″35506
8″12″35508
10″14″35510
12″16″35512
14″18″35514
16″20″35516
18″22″35518
20″24″35520
22″26″35522
24″28″35524

All green-underlined part and kit numbers link to the parts store. Ranged numbers (e.g. 35092–35102) open a search at the smallest size — pick the part matching your wall thickness. When ordering, specify model, inlet and wall thickness. For wall-thickness part charts, open a model's full specs above or see the catalog sheet form numbers.